ProStar™ Plasma Cutting Table - PRS200
Praxair’s ProStar™ PRS200 CNC plate cutting system features a dual-drive, robust design with pedestal-mounted rails and advanced motion control for use of conventional or high-definition plasma. The CNC controller provides all of the functions required for oxy-fuel and plasma cutting, including file conversion. To achieve superior cut quality on thicker materials, ask your local Praxair representative about installing this high-amperage, high-definition and easy-to-use plasma cutting system.
Standard Equipment
- Dual side-drive gantry and high-powered 650W AC brushless drives
- Welded, stress-relieved machine bridge beam
- Hypertherm® EDGE Connect® numerical control with software, USB interface and wireless networking
- Rack and pinion drive with precision planetary gear boxes
- 2 in. stainless steel drive band for slave/mirror image cutting
- 18 homing positions and procedures to square gantry during setup
- Rail-cleaning air blast and wiper system
- 11 bearings and multiple adjustments for providing smooth, accurate motion
- Elevated 30 lbs./ft. machined "T" rails with adjustable leveling pads
- 17 in. active matrix LCD touchscreen
- Built-in water table height control
- Power track guide to protect hoses and cables
- Heat shields to protect and hoses from sparks
- Three-part automotive paint finish
Standard Configuration
| Part No. | Cutting Width | Cutting Length | Lifter Speed: Plasma | Lifter Speed: Oxy-Fuel | Machine Speed: Traversing | Machine Speed: Contouring | Cutting Capacity: Plasma | Cutting Capacity: Oxy-Fuel | Maximum Stations: Plasma | Maximum Stations: Oxy-Fuel |
|---|---|---|---|---|---|---|---|---|---|---|
| PRS200 | 6 ft. - 10 ft. | 10 ft. - 50 ft. | 1,000 ipm | 70 ipm | 1 ipm - 1,000 ipm | 1 ipm - 500 ipm | Up to 2 in. mild steel Up to 2 in. aluminum and stainless steel | Up to 4 in. | 2 | 4 |
Specifications subject to change without notice.
